User Tools

  • Logged in as: anonymous (anonymous)
  • Log Out

Site Tools


mantis:ide_simulator:cli

This is an old revision of the document!


Command line interface

The IDE drive simulator implements a command line interface for debugging, configuration and experimentation. To connect, you must use a USB cable to connect to a host computer. When the device detects a host computer connected to either USB0 or USB1, it will simulate a serial port.

Connection

On Windows, use an app like HyperTerminal or PuTTY. When the device is connected, Windows should indicate a new COM: port has been added.

On Linux and MacOS X, the device will appear under /dev, such as /dev/ttyUSB0 or /dev/cu.usbmodem1431. You can use a tool such as minicom or screen to open this device.

Settings

As the serial port is simulated, baud rate, handshaking and other serial settings should not matter.

Basic usage

The command line works similar to DOS. It will present a prompt representing the current directory, and provides a number of commands. The help command lists commands currently known to the command interpreter. You can also use SD:, USB0: and USB1: to switch between the three drives, though they will be Unavailable if a storage device is not connected to the corresponding port.

Commands

Basic I/O

The board provides dir, cd, ren and sd:, usb0: and usb1: to allow you to navigate the storage attached to the device and inspect their contents.

Disk

The disk command provides a means to manipulate the simulated disk.

disk select (file)

This command allows a new disk image to be selected. It simulates the drive being ejected and re-inserted, so if the host machine has disabled eject (e.g. MacOS X's default behaviour) the command will fail, as the disk cannot be removed.

disk remove

This command removes the disk, but as above, respects the eject disable flag, so it will fail if the host machine has locked the drive.

disk disconnect

This command forcibly removes the disk, and will cause I/O errors for the host machine if it continues to attempt to access it.

disk search

This command triggers the startup logic, where the IDE simulator will search for a disk image to use. See the 'startup' page for a description of this behaviour.

disk describe (file)

This command inspects a disk image and prints out relevant information, without having to select the image into the simulated disk drive. If no file is specified, it will describe the disk image currently loaded, if any.

disk play (track)

This command will start audio playback, if the disk image is a CD and the given track number is an audio track.

Debugging

These commands are provided to allow us to debug new games and applications in the field, where we may not have direct access to the hardware but still want to be able to add support.

monitor

This command will print out ATA requests (including ATAPI packets) as they arrive on the IDE interface. This allows for remote debugging to support new games and applications that may utilise functionality that's not currently implemented. Note that this command has a major impact on performance.

history

This command prints out the contents of the debug ring buffer, which is the same format as the monitor command but does not impact performance, and provides a way to inspect what has happened in the past.

interface

This command prints out the values currently contained in the various IDE and internal registers.

processes

This command lists the state of the various tasks within the system.

status

This command provides some convenient system status, including USB drivers and SD card state.

mantis/ide_simulator/cli.1555402864.txt.gz · Last modified: 2023/10/02 03:29 (external edit)