User Tools

  • Logged in as: anonymous (anonymous)
  • Log Out

Site Tools


mantis:ide_simulator:known_issues

This is an old revision of the document!


Known issues

Here's a list of known issues with the current version of the simulator.

  • SD card slot is a little finnicky
    If possible, use USB0. Performance testing has indicated that a USB drive in USB0 has performance exceeding that of the SD slot anyway, so this is the preferred storage port. If you have a Rev B2 board this has been corrected with a much easier to use slot.
  • Device is much lower power than an optical drive
    Certain power supplies may expect a larger load on 5V or 12V lines, and so fail to start up correctly. In this case, you may need to install a load resistor over one or both of the power lines in your machine. Please ensure to use a resistor with a sufficiently large power capacity.
mantis/ide_simulator/known_issues.1625002721.txt.gz · Last modified: 2023/10/02 03:29 (external edit)